What to do about repr(C, simd)?
Currently, repr(C, simd) warns about "incompatible representation hints", but leaving off the repr(C) triggers the FFI lint when the SIMD type is used in FFI.
Note that #[repr(C)] #[repr(simd)] does not warn only due to #47094. Most uses of SIMD in FFI this in the Rust source tree use two separate repr attributes, which is why they didn't trigger this warning so far.
There's two ways to resolve this:
- Require
repr(C, simd)for SIMD types used in FFI. - Say
repr(simd)is sufficient for FFI (in principle -- there are other concerns that keep SIMD-FFI feature gated at the moment) and keep the warning aboutrepr(C, simd). It could optionally restricted to some simd types that are known to correspond to C types on the platform in question (e.g., permitf32x4but notf32x3).
cc @alexcrichton
Oh I was just under the impression we want to unconditionally ban simd types from C APIs. AFAIK the ABI is highly dependent on how C and Rust are compiled (target features and whatnot) and it's very tricky to get them to match up.
Alex Crichton at 2018-01-01 19:12:08
Passing vectors as immediates has all these problems and therefore is feature gated separately (
feature(simd_ffi)) but if SIMD types are not considered C-compatible, even passing pointers to them will trigger the lint, which I imagine would be very annoying.Hanna Kruppe at 2018-01-01 19:19:50
Oh sure yeah, I'd expect
&mut u8x32to work just fine, I'd only expect passingu8x32as a bare value to "basically never work"Alex Crichton at 2018-01-02 05:51:34
Doesn't the alignment of SIMD types depend on which target features are enabled? If so, isn't it bad when a pointer to a SIMD type is passed around when it was allocated with a lower alignment than expected by the receiving end?
Peter Atashian at 2018-01-02 07:58:29
On the Rust side, it appears vectors are always naturally aligned (rounded up to the next power of two when needed? not that it matters for types you would see in FFI). The same seems to be true in C.
And now that I've thought about it, I can't really see how it could be any other way – type alignment is a global property, while target_feature can vary by function.
Hanna Kruppe at 2018-01-02 10:12:59
So in the light of the above discussion I would propose:
- Declare some SIMD types FFI-safe irrespective of target features, based on architecture and element type and vector length. Which ones exactly is tbd, should probably be based on what C toolchains offer on the respective platform.
- Keep warning on
repr(C, simd). - Keep the
simd_ffifeature gate which rules out passing SIMD types as immediates (this prevents any ABI mismatches due to different target_features)
Hanna Kruppe at 2018-01-05 18:16:45
Declare some SIMD types FFI-safe irrespective of target features, based on architecture and element type and vector length. Which ones exactly is tbd, should probably be based on what C toolchains offer on the respective platform.
@rkruppe do you have a concrete example that works? That is, a platform, toolchain, and SIMD type, where passing a SIMD type by pointer to C via FFI works?
Do the target-features of the Rust and C binaries cause problem when passing for example a
*mut f32x8from Rust to C or vice-versa?gnzlbg at 2018-03-28 11:53:40
I'm not aware of any ABI problems with pointers to vectors -- pointers are pointers are pointers. The only possible problem would be alignment, but that's irrespective of target features as discussed above. The only reason I propose to lint for types like
f64x128is that they don't have a common C equivalent (well, not quite true, there is a little-used GCC extensions for arbitrarily long vector types, but our FFI lint shouldn't care about that sort of thing).Hanna Kruppe at 2018-03-28 12:08:32
@rkruppe I would leave the lint out, at least initially. If somebody uses these types in C FFI, whatever C compiler they are using is already going to lint these for them.
gnzlbg at 2018-03-28 12:18:19
Since when do C compilers have such lints? (Since when can they even have such lints? C has no concept of a function defintion specifically for FFI, and surely you wouldn't want to warn for functions used by another translation unit of the same program.)
If we don't want to get into the business of defining which vector types are fine for FFI or not, I'd rather unconditionally consider them ffi-unsafe, i.e., always lint on the Rust side. This is closer to what @alexcrichton originally proposed (though a lint, not a hard error, since the ABI concerns are nowhere near as strong).
Hanna Kruppe at 2018-03-28 12:34:17
But I realize now that some people might be using
repr(C, simd)to get a guaranteed layout, not for FFI. For example, to permit type punning in memory. Do we want to support that, and guarantee the layout of vector types? Would be analogous to arrays, I believe.Hanna Kruppe at 2018-03-28 12:35:32
@rkruppe
Since when do C compilers have such lints? (Since when can they even have such lints? C has no concept of a function defintion specifically for FFI, and surely you wouldn't want to warn for functions used by another translation unit of the same program.)
What I meant is that when one uses these types on Rust FFI, one would also need to write "some types" in the C side of things. If some types are not supported by the users' C toolchain, then the user would get a compilation or linking error on the C side of things.
gnzlbg at 2018-03-28 12:49:35
But GCC does support those types as I mentioned. Allowing any and all repr(simd) types in FFI means we're basically comitting to supporting whatever GCC does with those.
Hanna Kruppe at 2018-03-28 12:53:10
Also the FFI lint is also useful for catching errors where you think you have matching signatures on the Rust and C sides but the Rust signature "can't be right". For example, translating C's
charto Rust'schar.Hanna Kruppe at 2018-03-28 12:55:05
@rkruppe to do this right we need to know which C toolchain the user wants to use, what support does this toolchain have for repr(simd) types, and allow those.
But we can't know this.
gnzlbg at 2018-03-28 12:57:10
I'm fine with considering all repr(simd) types non-ffi-safe. We probably still need to define the layout, though.
Hanna Kruppe at 2018-03-28 12:59:09
I would be fine with allowing all
repr(simd)types on FFI via pointers, I just think that linting here is hard to do correctly.If we are calling into a C function from Rust, it is fine to assume that the C compiler supports the
repr(simd)type since otherwise no C library can be generated. If the signatures between the Rust and C code do not match, we should obviously produce a good error.If we are exposing a Rust function to C, if the C compiler does not support the
repr(simd)type it is its job to emit a diagnostic because we can't know what the C toolchain does or does not support.gnzlbg at 2018-03-28 13:04:04
I don't understand why you'd want to give no warnings at all. If there is uncertainty about or variance in what the C toolchain provides, surely we should err on the side of caution? Otherwise, we wind up implying that we match what the C compiler does, which seems impossible to guarantee if you say that "linting here is hard to do correctly". As another example, i128 is considered ffi-unsafe even though quite a few C toolchains support it.
If the signatures between the Rust and C code do not match, we should obviously produce a good error.
??? we can't. that's the whole problem with FFI.
If we are exposing a Rust function to C, if the C compiler does not support the repr(simd) type it is its job to emit a diagnostic because we can't know what the C toolchain does or does not support.
This lint doesn't even run for Rust-defined functions currently (#19834) but if it did, again, the purpose of the lint is also to warn about bindings that are very dubious on the Rust side, and therefore likely contain a human error.
Hanna Kruppe at 2018-03-28 13:19:42
I think we are talking past each other (as usual :P). I am not against linting per se, I am against linting against some
repr(simd)types but not others, because I cannot think of any good heuristic for how to separate them. Emitting a warning when someone uses anyrepr(simd)type on C FFI is fine to me.gnzlbg at 2018-03-28 13:35:03
OK, cool. (I still don't see how I could've possibly extracted that from your last few comments, but whatever.) That still leaves the issue of using
repr(C)to define layout without any intent to do FFI.Hanna Kruppe at 2018-03-28 13:47:38
We probably still need to define the layout, though.
A lot of people expect this to work correctly:
union A { data: [f32; 4], vec: f32x4, } let x: [f32; 4] = unsafe { A { vec: f32x4::new(1., 2., 3., 4.) }.data }; assert_eq!(x[2], 3.);So I would be fine with defining vector types to have the same layout as arrays (EDIT: preserving the alignment requirements of the vector type).
gnzlbg at 2018-03-28 13:48:15
Hm. The 128-bit SIMD types (u8x16, i16x8, f32x4, u64x2) should be passable in registers on x86_64 to the System V AMD64 ABI, as far as I can tell.
__m128can only be passed by pointer to the Windows "x64 calling convention".But we can pass some types by register to
__vectorcallonx86-64-pc-windows-msvc.Jubilee at 2021-10-05 23:52:01
Oh I was just under the impression we want to unconditionally ban simd types from C APIs. AFAIK the ABI is highly dependent on how C and Rust are compiled (target features and whatnot) and it's very tricky to get them to match up.
This is being tackled with https://github.com/rust-lang/rust/issues/116558 -- we are only allowing calls involving those types when the right target features are present. That should ensure a consistent ABI.
So... allowing
repr(C, simd)should be fine then?Ralf Jung at 2024-11-23 16:10:37